H. F. Linskens; M. V. Tracey; Ulrich Beiss; Fay Bendall; Walter Björk; F. Bohlmann; Hans G. Boman; Richard Braun; Heinen Springer-Verlag Berlin and Heidelberg GmbH & Co. KG (2012) Pehmeäkantinen kirja
H. F. Linskens; M. V. Tracey; Fay Bendall; F. Bohlmann; Richard Braun; Rudolf Lambert; Carlos O. Miller; Gerh Pfleiderer Springer-Verlag Berlin and Heidelberg GmbH & Co. KG (1963) Kovakantinen kirja
Springer Sivumäärä: 762 sivua Asu: Kovakantinen kirja Painos: Reprint of the 1st e Julkaisuvuosi: 1980, 01.04.1980 (lisätietoa) Kieli: Saksa
If, following the solvent extraction of a hydrocarbon from a plant, it is not known whether it is one or the other, a method of distinguishing the two is described by HENDRICKS, WILDMAN and JONES (1946). The technique involves the infra-red absorption spectra of the two isomers. At about 12 mp. the relative absorption coefficient of rubber is 42% greater than for gutta. ScHLESINGER and LEPER (1951) describe two procedures for separation of the rubber and gutta hydrocarbons from large quantities of crude chicle. In one, the chicle is extracted with benzene which dissolves both isomers. An excess absolute ethyl acetate is added and the mixture stored at 5° C overnight. The gutta precipitates out and the rubber remains in solution. The other method is as follows: (1) Ten grams of chicle are extracted with acetone for 24 hours in a Soxhlet extraction apparatus. (2) The insoluble material in the thimble is allowed to .. it dry, then immersed in 150 ml. of cold Skellysolve B in a refrigerator at 10° C and· allowed to stand for 48 hours with occasional agitation. (3) The thimble is then removed from the solvent and the enclosed residue washed several times with fresh, cold Skellysolve B. (4) An excess of acetone and a few drops of a concentrated aqueous solution of sodium iodide are added to the combined Skellysolve B extract and washings and allowed to stand overnight in a refrigerator.